Almost every vehicle owner will encounter a dead battery at some point during their driving journey. It’s a frustrating and disruptive experience, but with the right portable power bank or jump starter, you can swiftly get your day back on track. These gadgets pack enough extra power to kickstart your engine.

With various sizes and styles to choose from, NOCO portable jump starters come in a range of prices, typically ranging from under $150 to around $2,000, depending on your requirements. Most options fall within the under-$400 bracket. Once you’ve made your purchase, how do you go about using it for jump-starting a car?

Unlocking the Potential of a NOCO Portable Jump Starter

NOCO’s line of portable jump starters is engineered to offer a convenient solution for reviving dead vehicle batteries. These robust devices are available in a range of sizes and capacities, spanning from 1,000 amps to 6,250 amps, and some models can accommodate either 12-volt or 24-volt systems, catering to a diverse array of vehicles, including cars, RVs, trucks, and boats.

Beyond their primary function of jump-starting, NOCO portable jump starters offer a multitude of features. Many models are equipped with built-in LED flashlights, featuring multiple modes such as SOS and emergency strobe, enhancing safety during roadside emergencies. Some units also come with USB ports for charging smartphones and tablets. Advanced safety mechanisms like spark-proof technology and reverse polarity protection ensure that you can jump-start your vehicles without risking harm to their electronic systems.

Getting Ready for a Car Jump-Start with Your NOCO Portable Jump Starter

When you’re about to connect your NOCO portable jump starter to your vehicle, it’s important to understand that it delivers a boost of current to assist your starter motor in cranking the engine powerfully. However, there are some key steps to follow in preparing both your vehicle and the jump starter.

First and foremost, your NOCO jump starter must be fully charged for it to work effectively. Verify that its charge level indicator indicates a sufficient charge to meet your requirements. If it’s not adequately charged, it’s essential to charge it up. Once that’s sorted, connect your cables to the 12V OUT port.

Additionally, ensure that your vehicle’s ignition key is removed, and turn off any electrical loads inside the car, such as the heater fan and headlights.

Jump-Starting a Car Using a Portable Jump Starter

Using a NOCO Portable Jump Starter is a quick and hassle-free process, regardless of the model you own. Follow these steps to connect and start a car with a low battery:

  • Connect Your Jump Starter to the Battery: Attach the clamps to the battery posts, ensuring that the red cable is connected to the positive (+) post and the black cable to the negative (-) post or a bare metal spot on the chassis.
  • Turn On the Jump Starter: Confirm that no electrical loads are active inside the car, then press the POWER button on the jump starter. An LED will illuminate to indicate a successful connection, and a red error LED will light up if the cables are connected incorrectly.
  • Attempt to Start the Engine: Turn the car key to the ON position and crank the engine. It should start promptly. In some cases, for vehicles with larger batteries or higher electrical demands, it might take up to 30 seconds to add sufficient charge to the battery for a powerful crank.
  • Turn Off and Disconnect: After successfully starting the car, turn off the jump starter, and then disconnect the leads from the battery, starting with the black clamp.

This revised version offers a clear and step-by-step guide to jump-starting a car using a NOCO Portable Jump Starter.

Utilizing Your Portable Jump Starter as a Power Bank

NOCO jump starters feature one or more USB OUT ports that can double as a power bank for your various devices. Whether your smartphone is running low on charge or you need a reserve power source for your laptop, this device is up to the task.

To use it as a power bank, follow these steps:

  • Start with the Jump Starter Powered Off: Just like when jump-starting your car, ensure that the jump starter is powered off initially.
  • Connect Your Device: Attach your device to the charging cable and then connect it to the NOCO device.
  • Power It On: Switch on the jump starter to begin providing power to your connected device, allowing for extended operation.

It’s essential to keep an eye on the battery level of your NOCO portable jump starter. Using it until the battery is completely depleted can have a negative impact on its overall lifespan. To prolong the life of Li-ion batteries, it’s generally recommended to avoid discharging them below 40% capacity.

Keeping Your NOCO Portable Jump Starter in Good Condition

Maintaining a NOCO Boost jump starter is relatively straightforward, with the primary focus being on keeping it charged. Here are some key maintenance steps to ensure it’s always ready when you need it:

  • Recharge After Use: Ideally, recharge your jump starter after each use. This ensures it’s ready to provide the necessary power when required. Even if you haven’t used it, it’s a good practice to recharge it at least once a year to maintain its battery health.
  • Protect Ports from Water: Prevent water intrusion by covering the IN and OUT ports when the jump starter is not in use. This safeguards it from potential damage due to moisture.
  • Avoid Extreme Temperatures: Operating the jump starter in extreme temperatures, whether excessively hot or cold, can affect its performance. Store it in a cool, dry place to extend its lifespan and maintain optimal functionality.

What’s the Charging Time for a NOCO Portable Jump Starter?

The charging time for a NOCO portable jump starter can range from a few hours to several hours, depending on the model and capacity. Refer to the user manual for your specific model for precise charging times.

Categorized in:

Tagged in:

,